PRESS CONTROL PLUS 4-20

PRESS CONTROL PLUS 4-20

Direct starting electronic control panel 1 motor for pressurizzation with display and pressure transducer

 

  • Unbalance protection with current reading on 3 phases
  • Motor’s data auto learning
  • Events and alarms data logger
  • Single-phase version with power relay for inductive loads (up to 31A)
  • Protection for motherboard
  • Remote control SALUPO CONNECT
Categories: ,

GENERAL SPECIFICATIONS

  • Operating voltage 230Vac +15/-20% 50/60Hz (SA640.xx)
  • Operating voltage 400Vac +15/-20% 50/60Hz (SA650.xx)
  • General disconnecting switch with door lock
  • Button for automatic operation
  • Button for manual operation (stable/unstable)
  • Pressure transducer 0-10bar output 4-20mA
  • (*It is possible to supply pressure transducers of 16 and 25 bar on demand)
  • Auxiliary circuit protection fuse
  • Motor protection fuse
  • Contactor (SA650.xx)
  • External thermoplastic box
  • Cable glands
  • Protection degree IP65
  • Operating temperature -5/+50°C
  • Relative humidity 60% at 50°C (not condensed)

ADVANTAGES

  • Multilingual Display LCD to visualize:
    • Operating voltage
    • Current
    • Hour counter
    • System pressure with pressure transducer
    • All information concerning the operation of the motor
  • Minimum and maximum current auto learning
  • Adjustable maximum number of startings per hour
  • Dry running with level control and minimum current
  • Loss of pressure control
  • Adjustable mains supply returning
  • Operation with float switches, probes and pressure transducer

INPUTS/OUTPUTS

  • Input 4-20mA
  • N°2 very low voltage inputs for float switches or probes

PROTECTIONS

  • Maximum and minimum current protection with alarm
  • Unbalance protection with current reading on 3 phases
  • Lack and sequence of phases protection with automatic resent and alarm
  • Minimum and maximum voltage protection with automatic reset and alarm

SINGLE-PHASE 230Vac +15/-20% 50/60Hz
CODE TYPE POWER OPERATING DIMENSIONS mm WEIGHT BOX
kW HP CURRENT (A) A-H L-W P-D Kg
SA640.00 PRESS CONTROL PLUS 4-20 230 0,37÷2,2 0,5÷3 2÷18 285 245 140 2,3 03

 

THREE-PHASE 400Vac +15/-20% 50/60Hz
CODE TYPE POWER OPERATING DIMENSIONS mm WEIGHT BOX
kW HP CURRENT (A) A-H L-W P-D Kg
SA650.02L PRESS CONTROL PLUS 4-20 400 10 0,37÷7,5 0,5÷10 0,5÷16 285 245 140 2,8 03
SA650.03L PRESS CONTROL PLUS 4-20 400 15 2,2÷11 3÷15 4÷25 345 285 165 3,4 04
SA650.04L PRESS CONTROL PLUS 4-20 400 20 7,5÷15 10÷20 16÷32 345 285 165 3,5 04
SA650.05L PRESS CONTROL PLUS 4-20 400 22  7,5÷16 10÷22 16÷36 380 300 150 4,9 05
SA650.06L PRESS CONTROL PLUS 4-20 400 25  7,5÷18,5 10÷25 16÷45 380 300 210 5,8 06
SA650.07L PRESS CONTROL PLUS 4-20 400 30  7,5÷22 10÷30 16÷52 460 380 210 7,1 08

 

OPTIONALS
CODE TYPE
OP100.29/B On board GPRS expansion
OP100.39/B On board Ethernet expansion
OP100.49/B On board MODBUS RS-485 – BMS expansion
OP100.59/B On board Ethernet – WiFi – expansion
OP100.01 3 level probes kit
OP100.17/024 Wired 24Vac relay complete with socket
Op100.17/230 Wired 230Vac relay complete with socket
OP100.05 Wired single-phase surge arrester type 2
OP100.05/1 Wired three-phase surge arrester type 2
OP200.00 Alarm output 12Vdc 200mA and pure contact
OP100.13/1/12 Wired siren 12Vdc
OP100.13/2/12L Wired flashing Led lamp 12Vdc
SS100.00 Visual and acoustic alarm indicator (BASIC ALARM VA012)
OP00.10 Couple of brackets for collar (reference BOX 03-04)
For more optionals click here

 

SPARE PARTS
CODE TYPE
AC100.22/1/30 Display electronic board with flat cable 20pin 30cm
SD640.20/1 Single-phase PRESS CONTROL PLUS electronic board
SD650.20/1 Three-phase PRESS CONTROL PLUS electronic board 20A
SD650.30-40/1 Three-phase PRESS CONTROL PLUS electronic board 30-40A
SD650.60/1 Three-phase PRESS CONTROL PLUS electronic board 60A